Cast Iron Submersible Sump Pump with Vertical Switch Type, 1/3 HP, 120V

$229.61
- +
In stock
90 Available At My Branch
494 Available At All US Supply Locations

Brand
Zoeller
Part Number
53-0001
SKU
4179
Manufacturer
Zoeller Company

Details

Zoeller Effluent or Dewatering Submersible Pump, Automatic, Series: Mighty-Mate M53, 43 gpm, 1-1/2 inch Outlet, 19-1/4 feet Maximum Head, 3/10 hp, 115 VAC, 9.7 A, 60 Hz, 1550 rpm Motor, 3-Wire Cord, Non-Clogging Vortex Impeller, 130 degree Fahrenheit, Sleeve Bearing, Cast Iron, 10.0625 inch height x 10.06 inch W

The "Mighty-Mate" series of submersible pumps is designed for use inch residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. Cast iron models include a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feature of every pump inch this series, making it one of the most reliable inch the industry.

Specifications

Specifications
SKU4179
Weight23.000000
Voltage Rating115 V
SeriesMighty-Mate M53
Flow Rate43 gpm
Amperage Rating9.7 A
Item ReturnsThis item can be returned
Features

Features

  • Float operated, 2-pole mechanical switch and variable level, long cycle systems available
  • Entire unit pressure tested after assembly
  • Class B insulation, 7-1/4 in/3 in auto On/Off points
  • 1/2 in spherical solids handling, 9 ft cord, oil filled cooling
  • Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket
  • AISI 1215 cold roll steel motor shaft
  • Single phase, shaded pole, 3 wire cord and plug
  • 1-1/2 in NPT discharge
  • Corrosion resistant, powder coated epoxy finish
  • No sheet metal parts to rust or corrode
  • Stainless steel screws, switch arm, guard and handle
  • No screens to clog, watertight, neoprene square ring between motor and pump housing
  • Solid, buoyant, polypropylene float, oil-filled, hermetically sealed, automatic reset thermal overload protected motor
  • Upper and lower sleeve bearings running in bath of oil, entire unit pressure tested after assembly, carbon and ceramic shaft seal
  • Watertight and dust tight, permanently oiled bearings
  • Cast iron switch case, motor and pump housing, engineered thermoplastic base, glass filled, plastic impeller with metal insert
  • Frequency Rating: 60 Hz
  • Impeller Type: Non-Clogging Vortex
  • Bearing Type: Sleeve
  • Motor Speed: 1550 rpm
  • Outlet Size: 1-1/2 in
  • Temperature Rating: 130 deg F
  • Cord Type: 3-Wire
  • Dimensions: 10.0625 in H x 10.06 in W