Automatic Effluent or Dewatering Submersible Pump, 115 V, 1/2 HP

$354.14

In stock

10 Available At My Branch
200 Available At All US Supply Locations

Brand

Zoeller

Part Number

98-0001

SKU

181682

Manufacturer

Zoeller Company

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Zoeller Effluent or Dewatering Submersible Pump, Automatic, Series: Flow-Mate M98, 73 gpm, 1-1/2 inch Outlet, 23 feet Maximum Head, 1/2 hp, 115/230 VAC, 9.4 A, 60 Hz, 1725 rpm Motor, Non-Clogging Vortex Impeller, 130 degree Fahrenheit, Oil Fed Bearing, Cast Iron, 12-1/16 inch height x 10-1/8 inch W

This "Flow-Mate" model submersible pump is designed for use inch residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. This durable cast iron pump includes a powder coated epoxy finish to prevent corrosion and is designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feature of every pump, making it one of the most reliable inch the industry.

Specifications

Specifications
SKU	181682
Weight	36.000000
Voltage Rating	115/230 VAC
Series	Flow-Mate M98
Flow Rate	73 gpm
Maximum Head	23 ft
Horsepower	1/2 hp
Amperage Rating	9.4 A
Item Returns	This item can be returned

Features

Features
Features Float operated 2-pole mechanical switch Class B insulation, 9-1/2 in/3 in auto On/Off points 1/2 in spherical solids handling, 15 ft cord, oil filled cooling Auto reset thermal overload motor protection Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket AISI 1215 cold roll steel motor shaft Single phase 1-1/2 in NPT discharge Corrosion resistant, powder coated epoxy finish No sheet metal parts to rust or corrode Stainless steel screws, guard, handle, arm and seal assembly No screens to clog, all castings are cast iron class 25 to 30 25000 tensile strength, watertight, neoprene square ring between motor and pump housing Permanent split capacitor motor, oil filled and hermetically-sealed, automatic reset thermal overload protection Watertight, neoprene square ring between motor and pump housing Cast iron switch case, motor, pump housing and base, bearings, upper and lower oil fed cast iron, carbon and ceramic shaft seal Entire unit pressure tested after assembly Frequency Rating: 60 Hz Impeller Type: Non-Clogging Vortex Bearing Type: Oil Fed Motor Speed: 1725 rpm Outlet Size: 1-1/2 in Temperature Rating: 130 deg F Dimensions: 12-1/16 in H x 10-1/8 in W

Documents